Hestya 8 Pack Watering Stakes Automatic Irrigation System for Houseplants

Warm Tips:

1. To ensure better watering, please keep the bottle watering device below the high end of the green plastic cover.
2. Kindly note the specific requirements of each plant and pot size, and use the appropriate watering devices accordingly.
3. If the plants fail to receive adequate water, please repeat the above operation steps.
4. After months of use, the ceramic piece parts need to be cleaned to maintain the effectiveness of continuous usage.

Useful tool: The automatic watering probe is a simple and effective solution for watering plants when you are on vacation, on a business trip, or simply forget to water them. Remember to follow the steps of use!

Application: The 8-pack watering stakes are suitable for most automatic garden watering devices. They are a good choice for seeding and planting without causing pollution. Additionally, they will gradually release water into the pot as the plants require it.

Measurement: The connecting tube is 78 cm/ 30.7 inches in length, allowing the roots to receive water directly and achieve a drip irrigation system.

Kind reminder: The watering pile is suitable for watering any indoor plant. To speed up the water flow, raise the pot; to slow it down, lower the pot. Please note that the looseness of the soil, water absorption, and reservoir water level affect the infiltration rate. The higher the water level in the reservoir, the faster the infiltration. Adjust the water level according to your actual usage to achieve the desired results.

Usage: 1. Soak the ceramic cone and tube in water for 15 minutes, then fill the ceramic cone with water. 2. Fill the water pipe with water and discharge the air from the pipe. 3. When underwater, tighten the top and insert the ceramic cone into the soil. 4. Place the water pipe into the water bottle, ensuring it is higher than the potted plant. 5. Confirm that there is water flowing into the ceramic cone through the pipe.

product information: